OPERATING PROCEDURE
3. Removing the indoor heat exchanger.
(1) Remove the grille. (Refer to 1(1) (2))
(2) Remove the screws on both sides and in front of the front
panel. (Photo 5)
(3) Remove the screws of the nozzle assembly. (Photo 6)
(4) Remove the electrical box. (Refer to 1)
(5) Remove the indoor fan motor. (Refer to 2)
(6) Remove the screws of the motor support.
(7) Remove the fan casing. (Iower)
(8) Remove the insulation of the drain pan and remove the
screws. (Photo 7)
(9) Remove the screws under the drain pan.(Photo 8)
(10) Remove the drain pan.
(11) Remove the indoor heat exchanger.
Photo 5
Screws
Photo 6
Nozzle assembly
Photo 7
Insulation of drain pan and screws
Photo 8
38
PHOTOS
Front panel
Drain pan
Screws
Screws