KTM 690 Duke 2018 Setup Instructions page 11

3.6 Connecting the negative cable of the battery
3.7 Set the time and date
Main work
–
Connect negative cable
Guideline
Screw, battery termi-
nal
V00580-10
Finishing work
–
Mount the passenger seat. (
–
Set the time and date. (
Condition
The motorcycle is stationary.
–
Press the UP or DOWN button until the "Settings" menu appears
on the display. Pressing the SET button opens the menu.
–
Press the UP or DOWN button until the "Clock-date set" menu is
marked on the display. Pressing the SET button again sets the
unit of measure.
–
Press the SET button.
The hour next to "Clock" flashes.
–
Press the UP or DOWN button until the current hour is set.
–
Press the SET button.
K00393-01
The minute next to "Clock" flashes.
–
Press the UP or DOWN button until the current minute is set.
–
Press the SET button.
The day next to "Date" flashes.
–
Press the UP or DOWN button until the current day is set.
–
Press the SET button.
The month next to "Date" flashes.
–
Press the UP or DOWN button until the current month is set.
–
Press the SET button.
The year next to "Date" flashes.
–
Press the UP or DOWN button until the current year is set.
–
Press the BACK button.
Time and date are saved.
1
. Tighten the screw.
M6 2 Nm (1.5 lbf ft)
p. 6)
p. 9)
WORK 3
9