Removing The Fuel Tank; Electrical System Maintenance; Electrical System Safety; Battery Service - Toro MB TX 2500 Operator's Manual

Removing the Fuel Tank

1. Lower the platform.
2. Release the cushion.
3. Remove the cross bracket
4. Remove the fuel tank
operator platform.
Note:
top of the tank to move the fuel tank further
from the machine.

Electrical System Maintenance

Electrical System Safety

• Disconnect the battery before repairing the machine. Disconnect the negative terminal
first and the positive last. Connect the positive terminal first and the negative last.
• Charge the battery in an open, well-ventilated area, away from sparks and flames.
Unplug the charger before connecting or disconnecting the battery. Wear protective
clothing and use insulated tools.
• Battery acid is poisonous and can cause burns. Avoid contact with skin, eyes, and
clothing. Protect your face, eyes, and clothing when working with a battery.
• Battery gases can explode. Keep cigarettes, sparks, and flames away from the battery.

Battery Service

Removing the Battery
1. Park the machine on a level surface, move the
motion-control levers to the N
position, engage the parking brake, and lower
the hopper.
2. Shut off the engine, and remove the key. Allow
the engine to cool.
3. Remove the negative battery cable
battery.
4. Remove the positive battery cable
battery.
5. Remove the 2 wing nuts
and the battery.
3451-705A
and set it on the
Remove the fuel and vent lines from the
, securing rod
.
G186223
-
EUTRAL LOCK
from the
from the
g185906
,
Page 5–12 Maintenance: Electrical System Maintenance