TSC PRINTRONIX TX210 Series User Manual page 41

Item
Density
Set the printing darkness. Available setting range: 0 to 30.
Print Speed Set the print speed.
Slew Speed Use this item to setup feed speed. 203DPI: 1~8; 300DPI:1~6; 600DPI:1~4
BackFeed Speed
Use this item to setup back feed speed. Setting value is up to 6 ips.
Tear Off
Adjust media stop location. Available setting value range: -120~120 dots.
Set the print mode. There are 4 modes:
Tear Off: Next label top of form is aligned to the print head heating line location.
Print mode Peeler Off: Enable the label peel off mode.
Cutter: Enable the label cutter mode
Applicator: The printer prints a label when it receives a signal from the applicator.
Print Width Set the print width. Available setting range: 2 ~ 999 dots.
List Fonts
Print the current fonts list from the memory devices to the label.
List Images
Print current printer available images list stored at the memory device to the label.
List Formats Print current printer available formats list from the memory devices to the label.
List Setup Print current printer configuration to the label.
Control Prefix Set control prefix character.
Format Prefix Set format prefix character.
Description Default
16
6 (203dpi)
4 (300dpi)
3 (600dpi)
2
2 ips
0 dot
Tear Off
812
N/A
N/A
N/A
N/A
N/A
N/A
36