Loading The Media In Cutter Mode (Option) - TSC PRINTRONIX TX210 Series User Manual

3.4 Loading the Media in Cutter Mode (Option)

1.
Please refer to section
3.3 to install the media .
3.
Move the media guides
to fit the label width by
pushing the media
guide adjustment
button.
2.
Lead the paper through the
cutter paper opening.
4.
Open the peel-off cover.
Feed the liner into peel-off
cover slot.
5.
Use software to set the
media sensor type, calibrate
the selected sensor and set
the post-print action to
"CUTTER".(Please refer to
chapter 5)
16