Connecting The Pedal - Source Audio ZIO User Manual

Connecting the Pedal

Power
To power the unit, connect a 9-18V DC negative-tipped power supply to the jack labeled DC 9V on
the back panel.
Warning: Using an unregulated supply could damage the unit. Please be very cautious when using
3 rd -party power supplies and refer to the power supply requirements in the
this guide.
Guitar/Audio Connections
Using standard ¼" mono (TS) cables, connect your guitar, bass, or other instrument to the I
jack and your amp (or the next audio device in the signal chain) to the O
second amp, connect it to O
When the power and audio connections have been made, ZIO is ready for use.
Input Side Connections
INPUT
I is the primary input for guitar, bass, or other instruments. It can also accept line-level inputs
NPUT
and will work in your amp's effect loop. Connect it to your instrument or other audio source using a
mono (TS) 1/4" cable.
SA271
2.
UTPUT
ZIO User Guide
Specifications section of
NPUT
1 jack. If you have a
UTPUT
1
3