Maintenance In The Event Of A Malfunction - Smeg K43X Instruction Booklet

Instructions for the user EN
Any maintenance, installation or repairs should be carried out by qualified authorised
personnel by contacting Technical Support. Before carrying out any work, switch off the
power supply and wait until the appliance has cooled down.
Before moving the appliance from its position, make sure that the electricity and water
connections (electric cables and drain hose) are properly disconnected.
If the appliance is on wheels, make sure that any electric cables, hoses etc. are not damaged
while it is being moved. Make sure that you engage the wheel brakes. Avoid placing the
appliance near heat sources (e.g. fryers etc.).
After carrying out servicing and having put the appliance back in its original position, make
sure that the electricity and water connections have been connected correctly.

13. MAINTENANCE IN THE EVENT OF A MALFUNCTION

If the appliance malfunctions, disconnect it from the power supply.
Reconnect the appliance to the power supply and check if the problem persists.
If the problem persists, we recommend that you contact your dealer or the manufacturer
and ask for the Assistance Service explaining the problem and indicating the model of your
appliance. This information can be found on the DATA PLATE on the back of the appliance
and in the instructions booklet.
13.1 Spare parts
Only use original spare parts. All interventions must be carried out by authorized and
specialized technicians. Contact the Service Centre for spare parts.
18