Table of Contents
Advertisement
EN
10.1 Hood operation
The following controls are found on the front of the appliance:
10.2 Features
• Shutdown timer
• Intensive function
• Light brightness control
10.3 Touch Technology
The unit uses capacitive sensors to detect the touch of the button on the front glass panel.
10.4 Switching on
When power is turned on, the unit will be in the off mode. Only the
(low brightness). After touching the
buttons will be dimly lit. In Stand-by mode, the user can activate any function that is allowed
by the operating logic. The button of the active function will be brightly lit.
10.5 Button functions
Hood OFF button. (If the fan and the light are on)
Fan speed 1 button. Lights up when the motor is running at speed 1.
Fan speed 2 button. Lights up when the motor is running at speed 2.
Fan speed 3 button. Lights up when the motor is running at speed 3.
Instructions for the user
button, the unit will go into Stand-By mode and all
15
button is illuminated
Advertisement
Table of Contents
