5. PREPARING FOR INSTALLATION
EN
Instructions for the installer
5. PREPARING FOR INSTALLATION
Remove the outer packaging and dispose it in accordance with the current regulations in the
country of installation.
5.1 Removing protective film etc.
Completely remove the protective film from
the external and internal walls.
Remove all traces of glue.
If this is not possible, remove it using a
suitable solvent.
Remove all information materials from the
inside and any plastic bags.
5.2 Positioning
Fig. 5.2.1 – Unscrew the 2 screws of the oven (1);
Fig. 5.2.2 – Place the extractor hood (2) on the oven (3);
7