Safety Information
The following section contains the safety information that
you need to be familiar with before servicing the IBM
Netfinity EXP15, EXP200, or EXP500 Storage Expansion
Unit.
Statement 1
DANGER
To avoid a shock hazard, do not connect
or disconnect any cables or perform
installation, maintenance, or
reconfiguration of this product during an
electrical storm.
To avoid shock hazard:
–
The power cord must be connected
to a properly wired and earthed
receptacle.
–
Any equipment to which this
product will be attached must also
be connected to properly wired
receptacles.
When possible, use one hand to connect
or disconnect signal cables to prevent a
possible shock from touching two
surfaces with different electrical
potentials.
Electrical current from power, telephone,
and communications cables is
hazardous. To avoid shock hazard,
connect and disconnect cables as
described following when installing,
moving, or opening covers of this
product or attached devices.
112
IBM Netfinity EXP15, EXP200, EXP500 HMM