b) Adjusting the reception
• Select the reception range AM (MW) or FM (VHF) by placing the selector
switch
in the relevant position.
• Then search for the desired radio station by slowly turning the tuning
regulator
tuning regulator
"FM" in the unit "MHz" (Megahertz) and, for "AM" in the unit "kHz"
(Kilohertz), this is then be multiplied by 10.
Adjusting the time functions
a) Programming the alarm time
• Press the button MODE
indicator "AL" (Alarm time) appears.
• Press on the button MODE
are shown in the display (e.g. "1: A") and, at the same time, the indicator
"AL" (Alarm time).
• Press repeatedly on the button SET
shown, e.g. "7: A". The letter "A" after the figure means "AM" (mornings),
"P" means "PM" (afternoons).
• Press the button MODE
minutes are shown in the display (e.g. ":00") and, at the same time,
the indicator "AL" (Alarm time).
• Press repeatedly on the button SET
shown, e.g. ":30".
until you have clear reception. From the lettering above the
you can read off the currently tuned frequency – for
. In the display all positions blink and the
once again, so that only the figures for the
again, so that only the figures for the hours
until the hour figure is correctly
until the minute figure is correctly
- 6 -