Time Functions; Time, Date, Time Zone And World Time - Silvercrest KH 2030 Operating Instructions Manual

Time functions

The time functions can only be set when the radio is switched off. When used
for the first time the preset time of the global receiver is set to "0:00 00".
If the device is disconnected from its power supply the settings are lost.

Time, date, time zone and world time

You can set the time, date and time zone via the
query and set the world time, data alarm, medium wave reception, alarm time
reception and hourly mode.
When you press
During this time, adjust the setting with the
MODE
• Press x 1: Setting clock time
MODE
• Press x 2: Setting the date
MODE
• Press x 3: Set time zone ("Local City")
MODE
• Press x 4: Show world time
MODE
• Press x 5: Date alarm
MODE
• Press x 6: Set reception range for medium wave.
MODE
• Press x 7: Set alarm pause.
MODE
• Press x 8: Set 12/24 hour mode.
To apply a setting, just wait until the screen stops flashing (the screen reverts to the
time indication) or press
Setting clock time
MODE
• Press once. The most recently set time flashes on the screen.
UP
• Press the
minute intervals. Hold down one of the buttons for a few seconds to
move the setting forward or backward quickly at 10 minute intervals.
MODE
, the function to be set flashes for about 15 seconds.
MODE
to move on to the next function.
DOWN
or button to move the time forward or backward at
MODE
UP/DOWN
- 11 -
button. You can also
buttons.