Mitsubishi Electric MSZ-RW25VG Service Manual page 54

OPERATING PROCEDURE
Removing the horizontal vane motor unit (L) and the vane
motor (L) (vertical) (Photo 17, 18)
(9) Remove the 3 screws of the horizontal motor unit (L)
indicated in (Photo 17).
(10) Disengage the catch of the horizontal vane motor unit
(L), and remove the horizontal vane motor unit (L).
(Photo17)
(11) Disengage the link of the vertical vane motor unit (L)
(Photo18-1).
(12) Disengage the catch of the vertical vane motor unit (L),
and remove the vertical vane motor (L) from the verti-
cal vane motor unit (L), (Photo18-1).
Photo 17
Screws of
the vertical
vane motor
(R)
Catch of
Vertical
the
vane
horizontal
motor
vane motor
unit (L)
unit
OBH902A
3 screws of the
horizontal motor unit (L)
Detach the horizontal vane
motor units (L). Then move
them to the direction of , and
remove the link of the vertical
vane motor unit (L).
PHOTOS/FIGURES
Photo 18
Vertical vane motor unit (L)
Link
Photo 18-1
Photo 18-2
54
Catches