Mitsubishi Electric MSZ-RW25VG Service Manual page 50

OPERATING PROCEDURE
4. Removing the DISPLAY AND i-see SENSOR
ASSEMBLY, the display P.C. board, and the
receiver P.C. board (Photo 9).
(1) Remove the DISPLAY AND i-see SENSOR
ASSEMBLY (Refer to section 2).
(2) Cut off the cable tie of the lead wires of the DISPLAY
AND i-see SENSOR ASSEMBLY at the back side of
the display cover (Photo 9-2).
(3) Remove the lead wires of the DISPLAY AND i-see
SENSOR ASSEMBLY from the hooks (Photo 9-2).
(4) Disengage the 2 catches of the display cover, and
remove the display cover (Photo 9-1,2).
(5) Remove the display and receiver P.C. board (Photo
9-3).
Photo 9 (Details of the display, DISPLAY AND i-see SENSOR ASSEMBLY, and board in the display cover)
Photo 9-1
Display cover
DISPLAY AND i-see
SENSOR ASSEMBLY
Front view of DISPLAY AND
i-see SENSOR ASSEMBLY
Photo 9-3
Display cover
OBH902A
Catch
Receiver P.C. board
Display P.C. board
PHOTOS/FIGURES
Photo 9-2
Catch
Cable tie
Back side view of DISPLAY AND
i-see SENSOR ASSEMBLY
Exploded view of display cover
and DISPLAY AND i-see SENSOR
ASSEMBLY (Display P.C. board,
receiver P.C. board)
50
Hooks