Microprocessor Control - Mitsubishi Electric MSZ-RW25VG Service Manual

9

MICROPROCESSOR CONTROL

MSZ-RW25VG
-
E1
MSZ-RW35VG
-
E1
MSZ-RW50VG
-
E1
WIRELESS REMOTE CONTROLLER
Battery replacement indicator
Operation display section
Temperature buttons
NOTE: Last setting will be stored after the unit is turned OFF with the remote controller. Indoor unit receives the signal of the
remote controller with beeps.
INDOOR UNIT DISPLAY SECTION
Operation Indicator lamp
The operation indicator at the right side of the indoor unit indicates the operation state.
•The following indication applies regardless of shape of the indication.
Indication
Standby mode
(Only during multi system
operation)
OBH902A
Signal transmitting section
Distance of signal : About 6 m
Beep(s) is (are) heard from
the indoor unit when the
signal is received.
Operation select button
ECONO COOL button
OFF/ON
(stop/operate) button
SENSOR (i-see) button
Indication of
remote controller
model is on back
Operation state Room temperature
DRIVE button
i-save button
NIGHT MODE button
-
18
FAN speed control button
WIDE VANE button
VANE control button
PURIFIER button
DIRECTION button
TIME, TIMER set buttons
forward button
backward button
WEEKLY TIMER
set buttons
RESET button
CLOCK button
Lid
Slide the lid down
to open the remote
controller. Slide it down
further to get to the
weekly timer buttons.
Lit
Blinking
Not lit