Storage - DANA BREVINI BZ1-204 Installation And Maintenance Manual

5 STORAGE

If the product needs to be stored for more than 2 months:
• Protect the shafts and spigots with film of grease and/or anticorrosion protective fluids.
• Fill the gearbox with suitable oils, see "Lubrication" page 20, and orient the gearbox so that the breather plug is at the top.
• Store in a dry place with temperature between - 5°C and + 30°C.
• Protect the packages from dirt and dust.
• Avoid very damp places or exposed to the weather (no outdoor areas).
• Avoid direct contact of the gearbox with the ground.
• Place the gearbox on a stable support base and make sure there is no risk of sudden shifting.
Do not stack gearboxes.
Do not walk on or place weights on the packing.
Do not store any other materials inside the packing.
16 Dana Incorporated
Fig. 5
If possible position wooden wedges between the bottom of
the packing and the floor.
Store the packing well away from pedestrian or vehicular traf-
fic routes.
NOTE:
The efficiency of the rotary seals will deteriorate in case
of storage exceeding 6 months. It is advisable to do a pe-
riodical check by rotating the internal gears by hand,
turning the input shaft.
IMM-0007EN Pump Drives BZ