Handling - DANA BREVINI BZ1-204 Installation And Maintenance Manual

4.2 HANDLING

NOTE:
The weight of the packed products is given in the Transport Documents or Packing List.
If necessary, place wooden wedges of wood under the
package to facilitate lifting.
For handling, use lifting equipment suitable for the type of pa-
cking and of adequate capacity, given on the same.
Never tilt or turn over the packing during transport.
If the packages are unloaded by a lift truck, make sure the
weight is balanced on the forks.
IMM-0007EN Pump Drives BZ
If the packages are unloaded with a hoist or hook, make sure
the load is balanced and use approved lifting accessories for
the sling. For packages shipped on pallets, make sure the lif-
ting accessories do not damage the products.
When lifting and positioning of the package, be careful to
avoid violent impacts.
IMPORTANT:
The packages are not stackable.
HANDLING
Dana Incorporated 13