Reception - DANA BREVINI BZ1-204 Installation And Maintenance Manual

RECEPTION

4.3 RECEPTION
NOTE:
On arrival of the packages, check the good condition of their contents in the presence of the carrier. Check the supply
by means of the packing list enclosed with the product (transport documents), making sure the supply matches the or-
der specifications.
The strap fixing of the product to the packing is sharp; during unpacking it could strike the operator. The packing must be
removed as follows.
– Cut the straps with scissors (pay attention to the ends, which could strike the operator).
– Cut or remove the outer packing.
– Cut the inner strap (pay attention to the ends, which could strike the operator).
– Remove the gearbox from the pallet.
If any damage, defects or shortages are detected, immediately notify the Dana Motion Systems Italia S.r.l. Assistance Service.
14 Dana Incorporated
Fig. 2
Fig. 3
CAUTION
IMM-0007EN Pump Drives BZ