Sending A Fax From Memory - Sharp UX-CL 220 Operation Manual

Sending a Fax From Memory

You can scan a document into the fax's memory and send the document from
memory. This increases transmission speed and allows you to send a fax to
multiple destinations in a single operation. After transmission, the document is
automatically cleared from memory.
Note: If a power failure occurs while sending a fax from memory, you will need
to repeat the operation.
Broadcasting (sending a fax to multiple destinations)
This function allows you to send the same fax to as many as 20 different
destinations in just one operation.
When sending to multiple destinations, only auto-dial numbers can be used
to dial the numbers of the receiving machines.
1
Load the document(s).
If desired, press
resolution and/or contrast.
START/MEMORY
2
Press
3
Press (or
display (if no name was stored, the number will appear).
4
Press to select the destination.
5
Repeat Steps 3 and 4 for each of the other destinations to which you
wish to send the fax (maximum of 20).
To check your selected destinations, press
delete a destination, scroll to the destination and then press
RESOLUTION/
RECEPTION MODE to set the
.
) until the name of the destination appears in the
Sending a Fax From Memory
to scroll through them. To
STOP
.
85