Table of Contents
Advertisement
H27i
Operating Instructions
CONTROL IDENTIFICATION, LOCA-
TION, AND FUNCTION
Before operating the mower, become famil-
iar with the location and function of all op-
erator controls.
function, and operation of these controls is
important for safe and efficient opera tion of
the mower.
Ignition Switch
The ignition switch is located on the right front of
the body and is used to start and stop the engine.
The switch has three positions: "O" is the OFF
position, ON (RUN) is the position that the key
returns to after starting, and "S" is the START
position. When starting the engine, turn the key
clockwise to the "S" position.
Forward Speed
Control (FSC)
Blade Clutch
(PTO)
Body
Latch
CAUTION
Knowing the location,
Body Lift
Handle
Ignition
Switch
Circuit
Breaker
Operating Controls
Do not hold the key in the "S" position longer than
10 seconds. If the engine does not start, return the
key to the "O" position for at least 60 seconds
before making a restart attempt. Prolonged crank-
ing can damage the starter motor and shorten
battery life. Release the key when the engine
starts, and it will return to the ON (RUN) position.
To stop the engine, rotate the key counterclock-
wise to the "O" position.
OFF
Ignition Switch
Steering
Levers
Parking
Brake
Throttle
Hourmeter
Warning Lights (3)
Warning Horn
Operating Instructions
ON
START
27
Advertisement
Table of Contents
