Operating Instructions; Control Identification, Location, And Function; Ignition Switch - Walker H27i Operator's Manual

Operating Instructions

CONTROL IDENTIFICATION, LOCATION, AND
FUNCTION
Before operating the mower, become fa mil-
iar with the location and function of all op-
erator controls.
function, and operation of these controls is
important for safe and efficient opera tion
of the mower.

Ignition Switch

The ignition switch is located on the right front of the
body and is used to start and stop the engine. The
switch has three positions: "O" is the OFF position,
ON (RUN) is the position that the key returns to after
starting, and "S" is the START position. When start­
ing the engine, turn the key clockwise to the "S"
position.
Forward Speed
Control (FSC)
Blade Clutch
(PTO)
Body
Latch
28
CAUTION
Knowing the location,
Body Lift
Handle
Ignition
Switch
Circuit
Breaker
Operating Controls
Do not hold the key in the "S" position longer than 10
seconds. If the engine does not start, return the key
to the "O" position for at least 60 seconds before
making a restart attempt. Prolonged cranking can
damage the starter motor and shorten battery life.
Release the key when the engine starts, and it will
return to the ON (RUN) position. To stop the engine,
rotate the key counterclockwise to the "O" position.
OFF
Ignition Switch
Steering
Levers
Parking
Brake
Throttle
Hourmeter
Warning Lights (3)
Warning Horn
ON
START