Walker H27i Operator's Manual page 30

Assembly Instructions
Do not operate the mower with deck tilt-up
pivot joint UNLOCKED. Make sure locking
arms are in the LOCKED position and the
tilt-up joint is rigid (locked).
Do not operate the mower with deck in tilt-
up position. Do not move the tractor with
the deck in the tilt-up position.
Tilt-Up Hook and
Latch Connected
Tilt-Up Tilt-Up
Latch Hook
Deck Secured in TILT-UP Position
26
CAUTION
DANGER
Hitch Pin
Tilt Bar
F CHECK MOWER BLADE CONDITION,
SHARPNESS, AND SECURITY OF MOUNT-
ING
The blade mounting nuts on gear-driven decks
should be torqued to 60 lb·ft (81 N·m), and the
blade mounting bolts on belt-driven decks
torqued to 70 lb·ft (95 N·m). If blade sharpen-
ing is required, refer to Sharpen Mower Blades
on page 60.
F PERFORM ANY ADDITIONAL PROCEDURES
called for in the Maintenance Schedule Chart
on page 45.
H27i