Table of Contents
Advertisement
Available languages
Available languages
EN
Rules of operation and service life
Before operation of the tool and also after long break in the usage it is necessary to execute running-in
Of motor at idle speed during 10 minutes. This process is necessary for drying of winding.
Before each use make sure to check condition and safety of bolted-type connections.
Storage and technical maintenance
Store the tool in dry closed premise under the temperature from - 2 oC till + 40 oC.
To prevent breakdown of the electric motor after the tool bringing from co d to working premise it is necessary to keep corn mill within 10 hours in the prem-
ise without switching on.
In case of condensation do not switch the tool till complete moisture drying. Regular technical maintenance is the guarantee of long service life of the tool.
Fulfil all technical maintenance only after disconnecting the tool from the power supply. After work completion wipe the tool from dust. Make sure that
ventilation holes are clean and free.
ATTENTION! In case of own disassembling Of the tool within the guarantee period your guarantee for the too/ repair will become void.
4
WWW.NAKAYAMATOOLS.COM
Advertisement
Table of Contents
