Features; Kill Switch; Pressure Switch - Foxfury Lighting Solutions TAKER B30 Product Manual

FEATURES

POWER/KILL SWITCH
The Taker B30 has a Power/Kill Switch located on the BOTTOM of the
Battery Pack. This mechanism is used to shut down or disable the shield light.
PRESSURE SWITCH (INCLUDED)
The Taker B30 includes a Pressure Switch that allows the user to place
it anywhere on the shield. This makes it easier to access the Power/Mode
Switch. The Pressure Switch can easily be attached to the shield via Velcro
glue.

PRESSURE SWITCH

PRESSURE SWITCH
CONNECTOR
CONNECTOR
LIGHT HEAD
LIGHT HEAD
CONNECTOR
CONNECTOR
To connect the Pressure Switch Connector to the Pressure Switch,
simply confirm alignment, insert the connector, and tighten the Screw
Cap.
To connect the Light Head Connector to the Light Head, simply confirm
alignment, insert the connector, and tighten the Screw Cap.
POWER/KILL
SWITCH
PRESSURE
SWITCH
or
®
7