Advertisement
OPERATIONAL MODES
HIGH mode: Press the Power/Mode Switch once. From any mode press
twice (once for OFF and once for ON) to get back to HIGH mode.
LOW mode: From HIGH mode, press and hold the Power/Mode Switch
for 2.5 sec.
FLASHING mode: From LOW mode, press and hold the Power/Mode
Switch for 2.5 sec. To get back to LOW mode press and hold the Power/
Mode Switch for an additional 2.5 sec.
OFF or to EXIT a mode: Press the Power/Mode Switch once.
NOTE: The light does not retain the mode in memory . Once you turn the light
ON, you will have to reselect the mode you desire.
ASSEMBLING THE WEDGE
Each BT comes with one (1) 1.7" wide Wedge. The purpose of the Wedge is to
keep doors open. It can be placed under a door or at the door hinge opening.
1
1.
Place the narrow end of the Wedge on the bottom notch (located above
the Battery Door). Maneuver the wide end of the Wedge to the top notch
(located below the Charge Indicator).
6
OTHER FEATURES
NO SLIP GRIP
The BT is designed with a reinforced grip handle so that the light can be
gripped and activated by a user wearing thick gloves.
D-RING
A D-Ring with key ring is included with all BT's. It is intended to be attached to
the circular opening at the top of the Stainless Steel Clip on the BT .
NOTES
7
Advertisement
