Safety; Warnings; General - GBC 640T Installation & Operation Manual

Gbc laminator user manual
Table of Contents

Advertisement

640t – Installation and Operating Instructions
1. s
afety
Your safety, as well as the safety of others is
important. Before you install or use the machine,
read and follow all the safety notices carefully in
this chapter. In this instruction manual, and on the
laminator, you will find important safety notices
regarding the laminator. Read all of the instructions
and save these instructions for further use.
The safety alert symbol precedes each
safety notice in this manual. The symbol indicates a
potential personal safety hazard to you or others, as
well as laminator or property damage.
This safety alert symbol indicates a potential
electrical shock. It warns you to not open the
laminator and expose yourself to hazardous voltage.
The following warnings are found on the 640t
laminator.
!
ADVERTENCIA
ATTENTION
!
Riesgo de choque
Risque de
eléctrico
secousse
No abra:
électrique.
Adentro no hay
Ne pas ouvrir:
piezas reparables
Pas de pièces
por el usuario.
réparables par
Mantenimiento
l'utilisateur.
solamente por
Entretien
personal calificado.
seulement par
personnel qualifié.
This safety notice means that you could be seriously
hurt or killed if you open the laminator and expose
yourself to hazardous voltage.
CUIDADO
ATTENTION
POINT DE
PUNTO DE
PINCHAMIENTO
PINCEMENT
entre rodillos.
entre les rouleaux.
Mantener manos y
Tenir mains et
dedos a distancia.
doigts a l'écart.
This safety notice means that your fingers and hands
could be trapped and crushed in the rollers. Clothing,
jewelry and long hair could be caught in the rollers
and pull you into them.
Failure to observe these warnings could result in
severe bodily damage or death.
g
WARNING
!
Electrical shock
hazard.
Do not open.
No user
serviceable
parts inside.
Refer servicing to
qualified service
personnel.
CAUTION
PINCH POINT
between rollers.
Keep hands and
fingers away.
W
arnings
Do not attempt to service or repair the
laminator.
Do not connect the laminator to an electrical
supply or attempt to operate the laminator
until you have completely read these
instructions. Maintain these instructions in a
convenient location for future reference.
To guard against injury, the following safety
precautions must be observed when installing
and using the laminator.
eneral
Keep hands, long hair, loose clothing, and
articles such as necklaces or ties, away from
the front of the rollers to avoid entanglement
and entrapment.
Do not use the laminator for other than its
intended purpose.
Do not place the laminator on an unstable
cart, stand or table. An unstable surface may
cause the laminator to fall resulting in serious
bodily injury. Avoid quick stops, excessive
force and uneven floor surfaces when moving
the laminator.
Do not defeat or remove electrical and
mechanical safety equipment such as
interlocks, shields and guards.
Do not insert objects unsuitable for lamination
or expose the equipment to liquids.
Page 1-1

Advertisement

Table of Contents
loading

Table of Contents