Standby - Truma iNet X Operating Instructions Manual

Truma iNet X Panel / Truma iNet X Pro Panel
5.4

Standby

If no entries are made for a certain time, the control
panel goes into standby mode to save power� The dis-
play is switched off�
1
60 s
5 s
Fig� 4
1
Main menu
2
Lock menu
3
Standby mode
After 60 seconds, the display changes from the main
menu (Fig� 4-1) to the lock menu (Fig� 4-2)�
After another 60 seconds, the control panel goes into
standby mode (Fig� 4-3)� The display is off�
47000-00083 · 01 · 11/2021
2
3
60 s
1 s
 Some devices are switched off in standby mode,
depending on the device configuration, and some
devices remain switched on� The configuration is de-
pendent on the devices installed and cannot be set�
 In standby mode, all connected appliances can still
be controlled by other system participants (mobile
devices)�
If the control panel is in standby mode, press the Home
button briefly to activate it�
Press the Home button briefly (1 second)
The lock menu is displayed (Fig� 4-2)�
You can also press and hold the Home button to put the
control panel in standby mode�
In the main menu, press and hold the Home button
(5 seconds)�
The control panel goes into standby mode (Fig� 4-3)�
Operation
EN 25