Set Up A Project - Xinje XP-18 Series Operating Manual

C FD8205
S FD8206
ED FD8207
NOTE:
Users can set the power failure memory area, but the area can not over the soft component area.

3-3. Set up a project

About the software
The PLC program editing software is the same as Xinje XC series. Software name is XCPPro.
The interface of software is as below:
Set up a project
We take XP3-18R as a example to explain how to set up a project.
1. Modify the type
Open the software, click file---change PLC model:
First address of the power
failure memory area of C
First address of the power
failure memory area of S
First address of the power
failure memory area of ED
320 C320~C639
512 S512~S1023
0 ED0~ED16383
28