Titan atrato Instruction Manual page 3

Document ID: Atrato_Instruction_Manual_0322
These instructions are intended for use with the Atrato® Ultrasonic Flowmeter installed with
App Version 3.2.39 or higher; and the Interface Software Version 4.1.0 or higher.
This Version contains improved operation and configuration of the Atrato Meters including:
1. Lower CPU usage for multiple meter operation
2. Simple Local and Remote-Control Batching operation using inbuilt Relay
3. Auto Ranging LCD Display
4. Remote Restart Capability
5. USB Power Adapter operation
6. Additional Advanced Features
To view the version number, click the
Intended use:
• The Atrato Ultrasonic flowmeter is intended for use with filtered, homogenous liquids
®
• It is not recommended for highly pulsating flow systems
•
It is not recommended for systems with entrained gas
•
The flow tube should be kept full of liquid when powered
•
Ultrasonic flowmeters Must be installed with positive back pressure to function
correctly
Disclaimer:
This information has been reviewed and believed to be correct at the time of publication. Titan
Enterprises holds no responsibility for any inaccuracies. The material in this document is for
information purposes only.
Storage:
The equipment should be stored in its original packaging in a non-hazardous area. Care must
be taken to ensure it is not subjected to extremes of temperature or humidity. Store away from
solvents.
General Safety:
Installation should be done by competent personnel who understand the electrical and
mechanical requirements of electronic flow metering devices.
Opening of the equipment will void any calibration and warranty.
Equipment must be protected from electric shock, fire and solvents.
3
Titan Enterprises Ltd ©2021
®
button
Atrato_Instruction_Manual_0322