Auger Top Drive - PROALL G Series Operator's Manual

MX05001
Figure 9. Mix bowl
The lower lift link attaches to the auger through
self-aligning ball-type pivot points. The pivot pins
on the lower link arm make it possible to remove
the mix auger for maintenance.
Figure 10. Lower link auger pivot.
The lower link arm is designed to swivel in order
to assist in maintenance and cleaning. Two bolts
hold the swivel in place and need to be removed
to use the link swivel.
Figure 11. Lower link swivel.
Rev.
1

Auger Top Drive

WARNING
The mixing auger drive contains rotating
components. Always keep the cover on the
top drive while the mix auger is in use.
IMPORTANT: The mix auger top drive must be
greased regularly. Refer to Lubrication and
Maintenance Frequency on page 7-9 for
lubrication maintenance.
The hydraulically driven top drive holds and drives
the auger. Refer to the Operator Control section
on page 4-2 for information on auger drive
control.
Figure 12. Mix auger top drive.
6-4
3 March 2022