Cement Powder; Mix Auger - PROALL G Series Operator's Manual

Table of Contents

Advertisement

MX05001

Cement Powder

IMPORTANT: Care must be taken that no stone,
water, or other foreign material enters the cement
bin. A serious malfunction of the cement feeding
system may result.
The output of cement can be checked on the
computer.

Mix Auger

The mix auger contains many sub-systems that
work together in the mixing process. The
following figure displays the major components of
the mix auger system.
3
2
Figure 3. Installed mix auger equipped with drop-away
bottom mat. (1) mix auger, (2) mix bowl, (3) lower link
arm, (4) auger top drive.
The mixing auger receives the gunite materials
through the mix bowl, mixing throughout its
length and discharging the mix through the top of
the auger. The auger position is controlled
through the Mix Auger Paddle and its speed and
direction are controlled using the Operator
Control (refer to page 4-2.)
Rev.
1
The exposed mixing auger is extremely
dangerous. The auger ball valve can
prevent the auger from turning.
The auger cover is latched and may be opened for
cleaning. A cover catch holds the cover open
while cleaning by catching the cover handle.
4
1
6-2
WARNING
Figure 4. Cover catch.
Figure 5. Auger cover open for cleaning.
3 March 2022

Advertisement

Table of Contents
loading

Table of Contents