Table of Contents
Advertisement
MX05001
Safety Signs
Always keep safety signs clean and legible.
Replace safety signs that are missing or have
become illegible.
Replaced parts that displayed a safety sign
should also display the current sign.
Safety signs are available from your dealer.
How to Install Safety Signs:
•
Be sure that the installation area is clean and
dry.
•
Be sure temperature is above 50°F (10°C)
Rev.
1
•
Decide on the exact position before you
remove the backing paper.
•
Remove the smallest portion of the split
backing paper.
•
Align the sign over the specified area and
carefully press the small portion with the
exposed sticky backing in place.
•
Slowly peel back the remaining paper and
carefully smooth the remaining portion of
the sign in place.
•
Small air pockets can be pierced with a pin
and smoothed out using the piece of sign
backing paper.
2-8
3 March 2022
Advertisement
Table of Contents
