Table of Contents
Advertisement
2.5.4
Connection
1. Open the transceiver unit cover.
2. Plug the XH connectors at the end of signal cables (10S2140, 10S2141) into
the proper receptacles in the transceiver unit, referring to the labels on the
cables and numbers on the TRX board.
3. Lead the cables into the transceiver unit appropriately. For clamping, lay the
cables as shown in the figure "Cable location at metal clamp, top view" below.
4. Unfasten the cable fixing strip after wiring the hull unit.
Clamps for
lower slot
Cable
number
2-16
Transceiver unit
2
4
6
8
10
17
15
13
19
11
Cable location at metal clamp, top view
14 16
20
18
12
9
7
3
5
Clumps for
1
upper slot
Hide quick links:
Advertisement
Table of Contents
