Setting For Synchronizing Transmission With Other Equipment; Menu (Com1); Tx Rate Window - Furuno CH-300 Installation Manual

3.4 Setting for Synchronizing Transmission with
other Equipment
To synchronize transmission with other echo sounder (see paragraph 2.2), do as
follows:
1. Press the MENU key to display the menu.
2. Press ◄ to select COM1 at the top of menu display.
MENU
TX POWER
PULSELENGTH
TX RATE
INT REJECT
AGC
AUDIO LEVEL
: SELECT
3. Press ▼ to select TX RATE.
4. Press ► to display the setting window.
5. Press ◄ several times to select EXT.
6. Press the MENU key to close the menu.
COM1 COM2 HORZ VERT
MAX
LONG
10
OFF
OFF
0
: CHANGE MENU: END

Menu (COM1)

TX RATE
EXT. MIN

TX RATE window

ES PRESET
5
MAX
(EXT., 1-10)
3. ADJUSTMENT
SYS
3-5