Setting Of Interface Unit; Interface Unit, Dip Switch S1 Location - Furuno CH-300 Installation Manual

3. ADJUSTMENT
3.8

Setting of Interface Unit

Set DIP switch S1 in the interface unit as follows.
A unit is connected to DATA/VIDEO OUT port of the interface unit : all OFF.
Nothing is connected to DATA/VIDEO OUT port of the interface unit: all ON.
3-10
S1
J1
J2

Interface unit, DIP switch S1 location

Processor Interface
Unit
S1:All OFF
Processor Interface
Unit
S1:All ON
Processor Interface
Unit
S1:All OFF
ON
OFF
J3
*: J6 and J7 set to "THROUGH" side.
External
Monitor
Unit
External
Monitor
Unit
External
Monitor
Unit
Monitor
Unit
External
Monitor
Interface
Unit
S1:All ON