Specifications - Furuno NX-300 Operator's Manual

FURUNO
SPECIFICATIONS OF NAVTEX RECEIVER
1 NAVTEX RECEIVER
1.1
Receiving Frequency
1.2
Mode of Reception
1.3 Sensitivity
1.4
Message Category
2 DISPLAY SECTION
2.1
Display System
2.2
Display Modes
2.3
Message Storage
3 ANTENNA UNIT
3.1 Selectable Antenna
3.2
Input Impedance
3.3
Power supply
4 INTERFACE
4.1 Input Data
4.2
Output Data
NX-300
518 kHz or 490 kHz
F1B
2 mV e.m.f. (50 ohms), 4% error rate
A: Navigation warning
B: Meteorological warning
C: Ice report
D: Search and rescue information/ piracy and armed robbery
E: Meteorological forecast
F: Pilot message
G: Decca message
H: Loran-C message
I: Omega message
J: Differential omega message
K: Other electronic navigational aid and system message
L: Navigational warning (additional)
M to Y: Reserved – presently not used
V: Notice to Fishermen (US only)
Z: QRU (no message on hand)
4.5-inch (95 x 60 mm) Monochrome LCD, 120 x 64 pixels
Message Selection Mode, NAV Data Mode,
Message Display Mode
28,000 Characters
NX-3H-D: H-field antenna for NX-300-H-D
Others: Local supply antenna for NX-300-N-D
50 ohms
+5.0 VDC
NMEA0183 Ver.1.5/2.0, RS-232C, 4800 bps
GGA, GLL, RMB, ZDA
Message data for personal computer, RS-232C, 4800 bps
Data length: 8, Stop bit: 1, Parity: None
T/R Code: CR+LF, XON/XOFF Control, Local echo: ON
SP - 1
NX-300
E5629S01D
040324