Furuno NX-300 Operator's Manual page 29

Setting for communication software on PC
Baud Rate:
Character Length:
Stop Bit:
Parity:
X Control:
Downloading messages to a PC
Set up the computer to receive data. Messages are downloaded to a PC character by character
during reception.
To download all messages saved in NX-300, do the following;
1. Press the [MENU] key to open the main menu.
Press ! or " to select FUNCTIONS.
2.
3. Press the [ENT] key to show the FUNCTIONS menu.
Press " to select SAVE MESSAGE TO PC.
4.
5. Press the [ENT] key. The following display appears.
6. Press the [ENT] key.
7. Set up the computer to receive data.
Press # to select YES and press the [ENT] key.
8.
4800 bps
8 bit
1 bit
None
XON/XOFF
Figure 2-17 SAVE MESSAGE TO PC display
Figure 2-18 SAVING START window
2-7