Narrow Trails; Preventing True Sea Clutter Trails - Furuno FAR-2107 Series Operator's Manual

1.6

Narrow Trails

Target trails may be painted with thinner lines if desired. This can be useful when there
are a lot of target trails on the screen.
1. Right-click the TRAIL MODE box to display the TRAIL menu.
2. Select 3 NARROW TRAIL then push the left button.
3. Select OFF, 1 or 2 as appropriate then push the left button. "2" is thinner than "1".
4. Push the right button to close the menu.
1.7

Preventing True Sea Clutter Trails

You can prevent the tracing of true sea clutter trails near your ship to view the situation
around your ship more easily. Further, you may enable/disable your ship's trails.
1. Right-click the TRAIL MODE box at the bottom right corner on the screen.
2. Select 7 OS TRAIL then push the left button.
3. Select OFF, 1 or 2 as appropriate then push the left button.
Setting
OFF
4. Right-click to close the menu.
Draw your
ship's track
No
1 Yes
2 No
Prevent true sea clutter trails
7
near your ship
No
Yes
Yes