Adjustments; Choosing Position Data Source - Furuno GP-7000F Installation Manual

3. ADJUSTMENTS

This chapter shows you how to adjust your unit, from the menu. When choosing item or
option from the menu, you may use the [ENTER] knob or the CursorPad ( ). For sake of
brevity the descriptions contained herein use the [ENTER] knob.

3.1 Choosing Position Data Source

1. Press the [MENU] key to show the menu bar.
Menu Bar
2. Rotate the [ENTER] knob to choose ADVANCED from the menu bar and then push the
[ENTER] knob.
3. Rotate the [ENTER] knob to choose INPUT/OUTPUT and then push the [ENTER] knob.
GENERAL
PLOTTER MAP
Menu bar
FIX
NAVIGATE
COMPASS
INPUT/OUTPUT
EXT NMEA
C-FORECAST
GPS SIMULATION
ECHO SOUNDER SIMULATION On
SYSTEM UPDATE
ADVANCED menu
INTERNAL GPS SETUP
NMEA 1 INPUT
NMEA 1 OUTPUT
NMEA 2 INPUT
NMEA 2 OUTPUT
RS232/NMEA 3 INPUT
RS232C 3 OUTPUT
INPUT 3 MODE
DEPTH SOURCE
TEMP SOURCE
STW SOURCE
INPUT/OUTPUT menu
ALARMS ADVANCED
NMEA-0183 4800-N81-N
NMEA-0183 4800-N81-N
NMEA-0183 4800-N81-N
RS232C
Sounder
NMEA
NMEA
26
INFO FIND