Table of Contents
Advertisement
Button
combinations
There are many features on the SP2 that are accessed by button
combinations. When combining buttons, the PLAY and TRIG buttons are
referred to as UP and DOWN buttons. The GATE buttons are often used
as selectors when used with other context buttons. Usually, one press
of one GATE makes the selection, and the context button should be
released. If multiple GATES are pressed while holding a context button,
it might result in defining a chain of that context button (e.g., scales or
patterns). See all the button combinations below.
BASICS
PLAY= and TRIG= when used with other buttons
GATE=press any one gate
GATES=press multiple gates one after another while still holding the
context button
PATTERN+SLIDE=RECORD pitch sequence
SLIDE+MIDI=fix oscillator pitch drift
SLIDE+MIDI >2s=full automatic tuning in all octaves
SCALE+SLIDE=SAVE bank
SCALE+PATTERN+GATE=LOAD bank
SCALE+GATE=select a scale
SCALE+GATES=chain scales
SCALE+ / =select a semitone
SCALE+TEMPO=semitone on/off (indicated by PLAY LED and GATE 1)
SCALE+TEMPO+ / =transpose whole scale by one semitone
SCALE+MIDI=copy MIDI defined scale to currently edited scale
MIDI
MIDI >5s=MIDI learn
MIDI+GATE=set MIDI channel to 1 to 8
MIDI+selected GATE=set MIDI channel to 8+1 to 8
MIDI+PLAY=activate/deactivate MIDI clock
MIDI+SCALE=activate/deactivate MIDI scale mode
MIDI+PATTERN=activate/deactivate CV Out generating Velocity CV
8
Advertisement
Table of Contents
