Table of Contents
Advertisement
SEQUENCER SECTION
PATTERN+TEMPO=copy currently selected pattern to the next selected
pattern
SLIDE+GATE=activate/deactivate slide on that step SLIDE+ / =set
slide rate (1=no slide)
PLAY (short)=start and stop sequencer
PLAY+GATE=select playmode
PLAY+GATES=chain playmodes
TRIG=trigger envelope
TRIG+GATE=activate temporary FX (hold several to combine)
TRIG+PLAY+GATES=record loop of temporary FX
TRIG+PLAY=erase loop of temporary FX
STEP EDIT MODE
PATTERN+SLIDE (when seq. stopped)=enter/leave step edit mode
In the step edit mode (one step is blinking):
GATE=preview and select step (always triggers envelope)
GATE+move PITCH FADER=edit steps pitch
GATE+ / =transpose step in quarter tones
PLAY/STOP
AND FADER FREEZING
Start the sequencer by short-pressing the PLAY button and stop it the
same way. When the sequencer is playing, the PLAY light will blink each
time the sequencer goes to a new step. When it is stopped, it will just
stay ON.
The PITCH and PITCH MOD faders are controlled digitally. They can
be "frozen" to temporarily deactivate their operation to ensure smooth
interaction with the sequencer and the user expectations. When the
faders are active, their light is on; when they are not, it is off. To reactivate
the fader, either move it quickly or hit the value on which it is frozen, and
the light will come back on.
Once the sequencer is stopped, the PITCH fader will freeze, and its light
will go off. It will freeze at the pitch of the last played note.
30
Advertisement
Table of Contents
