Table of Contents
Advertisement
Utility
XY CROSSFADER
XY crossfader is a simple and yet powerful utility. It allows you to mix
two signals, X and Y, and crossfade between them with the knob. If only
X or Y (or neither) are connected, the function changes.
The XY crossfader is a simple but powerful utility that can function as
a mixer, a crossfader, an attenuverter, a signal offset, or a variable bipolar
voltage source, depending on how it is patched.
If neither X nor Y is connected: XY output gives voltage based on the
position of the knob from -2V to +2V. Patch it, for example, to the PWM
input to control the timbre of the oscillator.
If only Y is connected: XY becomes the attenuverter of the Y signal. XY
crossfades between the Y signal and its inverted version normalized to the
X input. Use in this configuration with XY knob fully left for signal inversion.
Patch CV to Y and patch XY to RATE to create dynamic envelopes.
If only X is connected: XY output crossfades between the X signal and
36
Advertisement
Table of Contents
