Table of Contents
Advertisement
MIDI
Softpop can receive a MIDI clock to sync the sequencer. Hold the MIDI
button and press one of the GATES to set the input channel. Press the
selected channel again to select channels 9-16, and the light indication
will invert.
MIDI >5s=MIDI learn
MIDI+GATE=set MIDI channel to 1 to 8
MIDI+selected GATE=set MIDI channel to 8+1 to 8
MIDI+PLAY=activate/deactivate MIDI clock
MIDI+SCALE=activate/deactivate MIDI scale mode
MIDI+PATTERN=activate/deactivate CV Out generating Velocity CV
Example: select 2, select 2 again (lights invert) and the channel number
is incremented by 8:
CH = 2 + 8 = 10
MIDI CHANNEL after pressing
the MIDI+GATE twice:
9
10
11
12
13
14
15
16
Hold the MIDI button for 5s to enter MIDI Learn Mode. In MIDI Learn Mode,
the SP2 will wait for a MIDI Note On message, remember its channel,
and save it as the input channel.
MIDI GATE is HIGH when any MIDI Note on the selected input MIDI
Channel is on. Patch it to TRIG to trigger the envelope or also to ACCENT
to create a sustained note.
MIDI+PLAY button will activate/deactivate the MIDI clock.
38
Advertisement
Table of Contents
