Table of Contents
Advertisement
UTILITY
the positive voltage of +2V normalized into the Y input. This is useful to
offset the X signal.
Both X and Y are connected: XY mixes the signals in a ratio set by the
XY knob. Use it to mix/crossfade audio, gates, voltages or create a dry/
wet mix of your audio.
PATCH POINTS
● X is the input that goes to the XY output when the knob is fully CCW.
The inverted version of Y input is normalized to this input.
● Y is the input that goes to the XY output when the knob is fully CW.
A static voltage of +2V is normalized to this input.
● XY is the section's output and is 4Vpp if nothing is plugged into X and
Y.
MULTIPLE
These four jacks are simply connected together and can be used to split
your signals and route them to multiple destinations.
You can also
connect two or three outputs into the multiple to passively mix them.
This will give you a combined average voltage and can be a cool way to
make complex modulation signals.
THE ORB
The Light Orb visualizes a few key parts of Softpop's operation. It can
help you understand the Softpop on a deeper level, but it can also be
turned off and saved for special moments. It also pairs well with phone
cameras. Put your camera in video mode and hold it right up to the Orb
to see some super-interesting visuals.
37
Advertisement
Table of Contents
