Table of Contents
Advertisement
BANK
LOAD/SAVE/COPY
Softpop can permanently store 8 banks where one bank consists of 8
patterns (pitch, gate slide), 8 user scales, and both of their chains. These
settings need to be SAVED by the user by pressing SCALE+SLIDE.
Softpop also stores tempo, divider, and MIDI settings (MIDI clock
selection, MIDI channel, MIDI Pitch mode, MIDI Velocity mode). These
settings are common to all banks, and MIDI settings are automatically
saved when changed. Tempo and divider are saved when pressing SAVE.
SP2 does NOT store Play Mode chains nor temporary FX loops.
To load a different bank, hold SCALE and PATTERN, and press one of the
8 GATES to load the corresponding bank. Banks can be performatively
changed while the sequencer is running. Re-loading a bank or loading
another bank will undo all changes done to the bank since the last moment
the bank was saved.
To copy an active bank to another slot, hold SCALE+PATTERN and press
TEMPO. While still holding SCALE+PATTERN, press a GATE to select
another bank and paste the copied bank to that slot.
40
Advertisement
Table of Contents
