Table of Contents
Advertisement
R0E420000MCU00 User's Manual
4.4 Opening an Existing Workspace
Follow the procedure below to open an existing workspace.
(1) In the Welcome! dialog box, select the radio button with the caption "Browse to another project workspace" and click on
the OK button.
Figure 4.10 Welcome! dialog box
(2) The Open Workspace dialog box shown below will appear.
Figure 4.11 Open Workspace dialog box
Specify the directory in which the workspaces was created, select the workspace file (extension ".hws"), and click on the
Select button.
(3) The High-performance Embedded Workshop will start, and its state will be restored to the state at the time the selected
workspace was saved. If the emulator was connected at the time, the workspace is automatically connected to the emulator.
If the emulator was not connected but you want to connect it, refer to "
R20UT0967EJ0402 Rev.4.02
Sep.01.21
4. Preparation for Debugging
4 .5.1 Connecting the Emulator
X
" (page 78).
X
Page 77 of 230
Advertisement
Table of Contents
