ATEN Altusen KA7171 User Manual page 24

KA7171 / KA7171AK / KA7174 User Manual
3. Plug the USB or PS/2 connectors on the other end of the KVM cable into
the appropriate ports on the local computer.
Note: Plugging both the USB and PS/2 connectors into the computer at the
same time may cause the installation to malfunction.
4. Plug one end of the Cat 5e cable into the unit's remote I/O port. Plug the
other end of the Cat 5e cable into the port of the KVM switch.
5. (For KA7171AK only) Plug the PS/2 connector of the 2XRT-0015G to the
purple control port on the front panel of the KA7171AK.
6. Plug the power adapter (supplied with this package) into an AC power
source; plug the adapter's power cable into the unit's power jack.
7. Power on the local PC.
14