CS533 User Manual FCC Information This is an FCC Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
CS533 User Manual User Information Online Registration Be sure to register your product at our online support center: International http://eservice.aten.com Telephone Support For telephone support, call this number: International 886-2-8692-6959 China 86-10-5255-0110 Japan 81-3-5615-5811 Korea 82-2-467-6789 North America 1-888-999-ATEN ext 4988...
Chapter 2, Setup, describes how to set up your CS533. The necessary steps for basic hardware and Bluetooth setup are provided. Chapter 3, Input Method Editor (IME), explains the IME feature for international users and how to use IME with your device.
For information about all ATEN products and how they can help you connect without limits, visit ATEN on the Web or contact an ATEN Authorized Reseller. Visit ATEN on the Web for a list of locations and telephone numbers: International http://www.aten.com...
Introduction Overview The CS533 Tap is a Bluetooth link that allows you to use a desktop keyboard and mouse* on a mobile device. With the CS533 you can use a desktop keyboard on your mobile device to compose and send text messages, e-mails, and instant messages;...
1 USB Mouse USB Power Adapter (optional) The CS533 can connect a mobile device to a USB keyboard and mouse without a computer. If you use the CS533 without a computer, a USB Power Adapter must be purchased to power the CS533.
Chapter 1. Introduction Components Rear / Front View Component Description Port LED’s Blue LED: light indicates which device is selected for keyboard and mouse use: 1. Computer 2. Bluetooth #1 3. Bluetooth #2 Keyboard Port Plug the USB keyboard into this port. Mouse Port Plug the USB mouse into this port.
Connecting the Hardware 1. Plug the CS533’s USB cable into the computer: 2. Unplug the USB keyboard from the computer, and plug it into the CS533. 3. Unplug the USB mouse from the computer, and plug it into the CS533.
Page 14
Note: 1. If you are using a wireless keyboard and mouse, be sure to plug the wireless receiver into the CS533’s keyboard port. 2. When the CS533 is plugged into the computer, it switches to port #2 so you can connect a Bluetooth device. If you would like to use the keyboard and mouse on the computer, use hotkey: [Alt][Alt] to switch to port #1 (see Hotkeys, page 12).
Page 15
Chapter 2. Setup Connecting Bluetooth To connect your iPad/iPhone via Bluetooth, do the following: 1. When the CS533 is plugged into the computer, it switches to port #2 to connect a Bluetooth device. 2. The CS533’s #2 Blue LED light flashes: 3.
Page 16
CS533 User Manual 5. Select General, then Bluetooth: 6. Turn Bluetooth On. 7. With Bluetooth On, your iPad/iPhone will search for devices:...
Page 17
Chapter 2. Setup 8. When the CS533 is discovered, it appears on the screen. 9. Select CS533 from the iPad/iPhone, as shown above. 10. A message will appear on the iPad/iPhone screen: 11. From the USB keyboard, type the PIN code that appears on your iPad/ iPhone, and press Enter.
Page 18
Note: 1. If you have a problem with the Bluetooth connection, see Clear Bluetooth Pairing, page 19, and repeat the steps above. 2. To connect a second Bluetooth device on the CS533, repeat the instructions above, using [Alt]+[F3] for step 1.
Chapter 3 Input Method Editor (IME) Overview IME is a component to set English keyboards to use other languages. If your device is used exclusively for English, you can skip this chapter. An Input Method Editor (IME) is an operating system component that allows users to enter characters and symbols not found on standard English keyboards.
Chapter 4 Advanced Functions Overview This chapter discusses the advanced functions of the CS533, including; Hotkeys, Switching, Keyboard Mapping, Clearing Bluetooth, Resetting, and Firmware Upgrades. Hotkeys The chart below lists the Hotkey functions and page for additional information. The “+” means: hold-down [Alt], then press the second hotkey.
Page 21
Chapter 4. Advanced Functions Function Hotkey Page Reset Settings Resets the CS533 settings. Disconnect Bluetooth Disconnects Bluetooth Connection Firmware Upgrade Invokes Firmware Upgrade Mode. then then Enable Keyboard Mapping Sets the QWERTY keyboard mapping. then then...
Page 22
CS533 User Manual Function Hotkey Page Enable Keyboard Mapping: Sets the Mac keyboard mapping. then then Enable Keyboard Mapping: Sets the iPad/iPhone keyboard mapping. then then...
Chapter 4. Advanced Functions Switching Switching the Keyboard and Mouse between devices Switching involves using hotkeys from the USB keyboard to select a device: Computer, Bluetooth Device 1, or Bluetooth Device 2. The Blue LED light indicates which port is selected for keyboard and mouse use: 1.
Page 24
CS533 User Manual 2. To switch the keyboard and mouse to Bluetooth Device (1) for use, from the USB keyboard press: 3. To switch the keyboard and mouse to Bluetooth Device (2) for use, from the USB keyboard press: 4. To switch the keyboard and mouse Back to the previous port, from the...
(iOS) The default keyboard layout for all ports is iOS. Set the keyboard Layout To set a keyboard layout for each port on the CS533, use the instructions below: The “+” means: hold-down [Alt], then press the second hotkey.
CS533 User Manual 2. Enable Keyboard Mapping, by pressing: 3. Change the layout to QWERTY, by pressing: then –or– change the layout to Mac, by pressing: then –or– change the layout to iPad/iPhone, by pressing: 4. See Keyboard Mapping Tables, page 31, for a guide of how each key will function under the new layout.
–or– 2. Disconnect the Bluetooth pairing for the selected port, by pressing: The blue LED light will flash, indicating the pair is cleared and the CS533 is ready to establish a new pairing. To create a new Bluetooth pair, see Connecting Bluetooth, page 7.
2. Disconnect the Bluetooth connection for the selected port, by pressing: The blue LED light will flash, indicating Bluetooth has disconnected. To reconnect Bluetooth: 1. Select the CS533 port for your iPad/iPhone. 2. From the iPad/iPhone turn Bluetooth On. 3. Press any key on the USB keyboard (Bluetooth will automatically...
Reset Settings Resetting clears all settings on the CS533. To reset the CS533 back to the factory default configuration, do the following: The “+” means: hold-down [Alt], then press the second hotkey. 1. From the USB keyboard connected to the CS533, press:...
1. From the computer connected to the CS533, go to ATEN’s Internet support site: http://eService.aten.com 2. Go to the Download Center, select the CS533, and click Firmware for a list of available downloads. 3. Download the appropriate CS533 Firmware Upgrade package to your computer.
Appendix Safety Instructions General Read all of these instructions. Save them for future reference. Follow all warnings and instructions marked on the device. Do not place the device on any unstable surface (cart, stand, table, etc.). If the device falls, serious damage will result. Do not use the device near water.
Page 32
CS533 User Manual Do not attempt to service the device yourself. Refer all servicing to qualified service personnel. If the following conditions occur, unplug the device from the wall outlet and bring it to qualified service personnel for repair. The power cord or plug has become damaged or frayed.
Appendix Technical Support International For online technical support – including troubleshooting, documentation, and software updates: http://support.aten.com For telephone support, See Telephone Support, page iii: North America Email Support support@aten-usa.com Online Troubleshooting http://www.aten-usa.com/support Technical Documentation Support Software Updates Telephone Support 1-888-999-ATEN ext 4988 When you contact us, please have the following information ready beforehand: Product model number, serial number, and date of purchase.
CS533 User Manual Specifications Function CS533 PC / Bluetooth Connections Port Selection Hotkey Connectors Keyboard 1 x USB Type A Female (White) Mouse 1 x USB Type A Female (White) Power Supply 1 x USB Type A Male (White) Cable Length Computer 1.8 m...
Compatible Mobile Devices Below is a table of HID devices* that support Bluetooth Human Interface Device Profiles for keyboard and mouse functionality. Devices that support Bluetooth Human Interface Device Profiles will work with the CS533 Tap. Supported Devices Brand Model O.S.
Page 36
CS533 User Manual Supported Devices Brand Model O.S. Version Fujistu F-05D / T01D / F-08D / IS12F F-03D, F-12C Samsung Galaxy SII i9100 / R i9103 Galaxy Nexus / Galaxy Note Galaxy Tab (3G)P1000 GALAXY S II LTE Android 2.x...
Appendix Standard Keyboard Commands Below are standard key combinations to: Copy, Paste, Cut, Restore, Select, Select All, and invoke IME Change from PC and Apple keyboards. PC Keyboard: Function Mac OS Windows OS Copy Paste Restore Select All Select IME Change* Spacebar Spacebar Apple Keyboard:...
Page 38
CS533 User Manual Function Mac OS Windows OS Paste Restore Select All Select IME Change* Spacebar Spacebar *An input method editor (IME) is an operating system component that receives keyboard input as data, allowing users to enter characters and symbols not found on the keyboard.
Appendix Keyboard Mapping Tables The keyboard mappings are listed on two tables. Select the one for the keyboard you are using: PC Keyboard or Mac Keyboard. Then use the Layout column to understand how the key will function when pressed under each keyboard layout (QWERTY, Mac, iPad/iPhone).
Page 41
Appendix PC Keyboard Layout QWERTY (PC) iPad / iPhone F10 / Mute Mute F11 / Volume Volume Down Down F12 / Volume Volume Up Windows Key + Windows Key + CD Eject Delete Delete Delete Forward Delete Delete Backward Print Print Screen Print Screen Screen...
Page 42
CS533 User Manual PC Keyboard Layout QWERTY (PC) iPad / iPhone Scroll Scroll Lock Scroll Lock Lock Home Home Home Home Page Page Up Page Up Page Up Page Page Down Page Down Page Down Down Delete Delete Backspace Backspace...
Page 43
Appendix PC Keyboard Layout QWERTY (PC) iPad / iPhone Insert Insert Insert Pause Pause Pause Break Num Lock Num Lock Clear Lock...
Page 47
Appendix Mac Keyboard Layout QWERTY (PC) iPad / iPhone fn / Help Insert fn / Help Home Home Page Up Page Up Page Up Page Down Page Down Page Up Clear Num Lock Clear...
CS533 User Manual Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR'S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK, OR ITS DOCUMENTATION. The direct vendor makes no warranty or representation, expressed, implied, or statutory with respect to the contents or use of this documentation, and especially disclaims its quality, performance, merchantability, or fitness for any particular purpose.
Need help?
Do you have a question about the cs533 and is the answer not in the manual?
Questions and answers