Screen Configuration; Setting The Day Of The Week And Time; Operation - Mitsubishi Electric Mr.SLIM PLY-P18 Operation Manual

3. Screen Configuration
Function Selection of remote
controller
A
Standard Control Screens
OFF
B
Timer Monitor
MON
TIMER
OFF
˚F˚C
4. Setting the Day of the Week and Time
MENU
2
BACK MONITOR/SET
PAR-21MAA
1
Note:
The day and time will not appear if clock use has been disa-
bled at Function Selection of remote controller.

5. Operation

2
3
TEMP.
3
MENU
2
BACK MONITOR/SET
PAR-21MAA
5.1. Turning ON/OFF
<To Start Operation>
■
Press the ON/OFF button 1.
• The ON lamp 1 and the display area come on.
RG79Y555H02_en.indd 5
Set Day/Time
TIME SUN
D C
˚F˚C
˚C
ON
C
Timer Setup
SUN MON TUE WED THU FRI SAT
B
WEEKLY
1
Day of the Week
& Time display
TIME SUN
˚C
˚C
9
TEMP. ON/OFF
ON/OFF
FILTER
4
DAY CHECK TEST
CLOCK OPERATION
CLEAR
6
4
5
˚C 8
˚C
7
ON/OFF
1
ON/OFF
FILTER
DAY
CHECK TEST
OPERATION 1
CLOCK CLEAR
5
7 8 6
<Screen Types>
For details on setting the language for the remote controller display, refer
to section 8. Function Selection.
The initial language setting is English.
●
Function Selection of remote controller:
●
Set Day/Time:
●
Standard Control Screens:
●
Timer Monitor:
●
Timer Setup:
<How to change the screen>
A : Hold down both the Mode button and the Timer On/Off button for 2
seconds.
WEEKLY
B : Press the Timer Menu button.
C : Press the Mode (Return) button.
D : Press either of the Set Time buttons (
2
1. Press the or Set Time button 1 to show display 2.
2. Press the Timer On/Off (Set Day) button 9 to set the day.
* Each press advances the day shown at 3 :
Sun → Mon → ... → Fri → Sat.
3. Press the appropriate Set Time button 1 as necessary to set the time.
* As you hold the button down, the time (at 4) will increment first in
one-minute intervals, then in ten-minute intervals, and then in 1-hour
intervals.
4. After making the appropriate settings at Steps 2 and 3, press the Filter
button 4 to lock in the values.
2
5
6
1
2
Set the functions and ranges available to the
remote controller (timer functions, operating re-
strictions, etc.)
Set the current day of the week or time.
View and set the air conditioning system's op-
erating status
View the currently set timer (weekly timer, sim-
ple timer, or Auto Off timer)
Set the operation of any of the timers (weekly
timer, simple timer, or Auto Off timer).
or ).
Day of the Week Setting
3
TIME SUN
Time Setting
4
3
7
3
5
6
7
5
2016/06/10 8:56:47