Mitsubishi Electric Mr.SLIM PLY-P18 Operation Manual page 14

8. Function Selection
[Function selection flowchart]
Setting language (English)
Item 1
Change
Language
Function
selection
E
Mode
selection
Display
mode setting
14
RG79Y555H02_en.indd 14
Normal display
(Display when the air conditioner is not running)
Hold down the button and press the button for 2 seconds.
E D
Remote controller function selection mode
Item 2
G
English
G
German
Spanish
Russian
E G
Italian
Chinese
French
Japanese
G
G
G
E
G
G
G
G
G
G
E
G
G
G
G
G
G
Hold down the button and press the
E
E
G
D
Dot display
F
E
G
Item 3
D
Operation lock setting is not used.
OFF
(Initial setting value)
D
Operation lock setting is except On/Off button.
no1
D
Operation lock setting is all buttons.
no2
D
The automatic mode is displayed when the operation
ON
mode is selected. (Initial setting value)
D
D
The automatic mode is not displayed when the operation mode
OFF
is selected.
D
The temperature range limit is not active. (Initial setting value)
OFF
D
The temperature range can be changed on cooling/dry mode.
D
The temperature range can be changed on heating mode.
The temperature range can be changed on automatic mode.
Automatic filter elevation panel up/down operation mode
Not necessary to set this mode. Refer to OPERATION MANUAL of
Optional Parts (Panel) for details on operation.
Fixed airflow direction mode
Not necessary to set this mode. Refer to OPERATION MANUAL of
indoor unit for details on operation.
D
The remote controller will be the main controller. (Initial setting value)
D
D
The remote controller will be the sub controller.
D
The clock function can be used. (Initial setting value)
ON
D
D
The clock function can not be used.
OFF
D
Weekly timer can be used. (Initial setting value)
D
Auto off timer can be used.
D
Simple timer can be used.
Timer mode can not be used.
D
The set contact numbers are not displayed in case of error.
OFF
(Initial setting value)
D
D
CALL- The set contact numbers are displayed in case of error.
The temperature unit °C is used. (Initial setting value)
˚C
D
D
˚F The temperature unit °F is used.
D
Room air temperature is displayed. (Initial setting value)
ON
D
D
Room air temperature is not displayed.
OFF
D
ON One of "Automatic cooling" and "Automatic heating" is displayed
under the automatic mode is running. (Initial setting value)
D
D
Only "Automatic" is displayed under the automatic mode.
OFF
button for 2 seconds.
D
Press the operation mode button.
Press the TIMER MENU button.
Press the TIMER ON/OFF button.
TEMP. ON/OFF
I
MENU ON/OFF A
FILTER
BACK MONITOR/SET DAY
CHECK TEST
B
PAR-21MAA CLOCK OPERATION CLEAR
H
C D
2016/06/10 8:56:51